Битбэйк рецепт, который включает в себя OpenCV

Я пытаюсь получить очень простой рецепт для сборки с использованием bitbake, и я не могу понять, почему opencv не может быть включен. Все примеры, которые я нашел, используют эту настройку и, по-видимому, не имеют проблем с подключением к opencv. Я довольно новичок в битбейке и боюсь, что буду неправильно понимать что-то очень простое. Заранее благодарим за любую помощь, которую вы можете предоставить.

Recipie:

UMMARY = "Hello"SRCNAME = "Hello"
depends += "opencv"
LICENSE = "PSF"LIC_FILES_CHKSUM = "file://${TOPDIR}/Yocto/Recipies/LICENSE.txt;md5=7424386ffe323e815ee62ee9ad591dd8"
SRCREV = "master"SRC_URI = "https://developer-binaries.s3.amazonaws.com/hello-1.0.zip"SRC_URI[md5sum] = "ca5940b7e30c489c4304c467252980f5"
inherit pkgconfig cmake

CMakeLists:

PROJECT(Hello)

CMAKE_MINIMUM_REQUIRED(VERSION 2.8.11)

FIND_PACKAGE(OpenCV REQUIRED)

ADD_EXECUTABLE(Hello
Main.cpp)

INSTALL(FILES
${CMAKE_BINARY_DIR}/Hello
DESTINATION ${exec_prefix}/bin)

Ошибка битбейка:

ERROR: Function failed: do_configure (log file is located at /home/ubuntu/oe-core/build/out-eglibc/work/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/hello/1.0-r0/temp/log.do_configure.5288)
ERROR: Logfile of failure stored in: /home/ubuntu/oe-core/build/out-eglibc/work/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/hello/1.0-r0/temp/log.do_configure.5288
Log data follows:
| DEBUG: Executing python function sysroot_cleansstate
| DEBUG: Python function sysroot_cleansstate finished
| DEBUG: SITE files ['endian-little', 'bit-32', 'arm-common', 'common-linux', 'common-glibc', 'arm-linux', 'arm-linux-gnueabi', 'common']
| DEBUG: Executing shell function autotools_preconfigure
| DEBUG: Shell function autotools_preconfigure finished
| DEBUG: Executing python function autotools_copy_aclocals
| DEBUG: Python function autotools_copy_aclocals finished
| DEBUG: Executing shell function do_configure
| -- The C compiler identification is GNU 4.8.3
| -- The CXX compiler identification is GNU 4.8.3
| -- Check for working C compiler: /home/ubuntu/oe-core/build/out-eglibc/sysroots/x86_64-linux/usr/bin/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-gcc
| -- Check for working C compiler: /home/ubuntu/oe-core/build/out-eglibc/sysroots/x86_64-linux/usr/bin/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-gcc -- works
| -- Detecting C compiler ABI info
| -- Detecting C compiler ABI info - done
| -- Check for working CXX compiler: /home/ubuntu/oe-core/build/out-eglibc/sysroots/x86_64-linux/usr/bin/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-g++
| -- Check for working CXX compiler: /home/ubuntu/oe-core/build/out-eglibc/sysroots/x86_64-linux/usr/bin/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/arm-angstrom-linux-gnueabi-g++ -- works
| -- Detecting CXX compiler ABI info
| -- Detecting CXX compiler ABI info - done
| CMake Error at CMakeLists.txt:5 (FIND_PACKAGE):
|   By not providing "FindOpenCV.cmake" in CMAKE_MODULE_PATH this project has
|   asked CMake to find a package configuration file provided by "OpenCV", but
|   CMake did not find one.
|
|   Could not find a package configuration file provided by "OpenCV" with any
|   of the following names:
|
|     OpenCVConfig.cmake
|     opencv-config.cmake
|
|   Add the installation prefix of "OpenCV" to CMAKE_PREFIX_PATH or set
|   "OpenCV_DIR" to a directory containing one of the above files.  If "OpenCV"|   provides a separate development package or SDK, be sure it has been
|   installed.
|
|
| -- Configuring incomplete, errors occurred!
| See also "/home/ubuntu/oe-core/build/out-eglibc/work/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/hello/1.0-r0/build/CMakeFiles/CMakeOutput.log".
| WARNING: exit code 1 from a shell command.
| ERROR: Function failed: do_configure (log file is located at /home/ubuntu/oe-core/build/out-eglibc/work/armv7at2hf-vfp-neon-angstrom-linux-gnueabi/hello/1.0-r0/temp/log.do_configure.5288)
ERROR: Task 6 (/home/ubuntu/oe-core/build/Yocto/Recipies/hello.bb, do_configure) failed with exit code '1'
NOTE: Tasks Summary: Attempted 540 tasks of which 539 didn't need to be rerun and 1 failed.
NOTE: Writing buildhistory
No currently running tasks (537 of 549)

2

Решение

Попробуйте изменить «зависит» на «ЗАВИСИМОСТЬ» — дело имеет значение.

2

Другие решения

Один из самых быстрых способов установить OpenCV в вашу сборку yocto

git clone git://git.openembedded.org/bitbake/
git clone git://git.openembedded.org/openembedded-core
git clone git://git.openembedded.org/meta-openembedded

Свяжите битбэйк с openembedded-core и настройте oe-core.

ln -s <Path>/bitbake <Path>/openembedded-core/bitbake
source openembedded-core/oe-init-build-env

Теперь отредактируйте ваш файл bblayers.conf

BBLAYERS? = «\ ~ Path / openembedded-core / meta \
~ Path / meta-openembedded / meta-oe \ «

Теперь в openembedded-core / meta / recipes-core / images / core-image-minimal.bb,

IMAGE_INSTALL + = «opencv libavcodec-dev libavformat-dev libswscale-dev»

PACKAGECONFIG_pn-opencv = «собственный jpeg libav png tiff»

Сохраните и закройте файл.

Кроме того, добавьте следующую строку в ваш local.conf, так как зависимости opencv предоставляются коммерческим рецептом ffmpeg.

LICENSE_FLAGS_WHITELIST += "commercial"

Теперь вы можете выполнить следующую команду, которая запечет измененный рецепт для OpenCV:

bitbake core-image-minimal
1